CONSTRUCTION: Door frames are constructed using 1-3/8″ thick finger-jointed West Coast kiln dried Hem/Fir Mortise and Tenon stiles and rails with shiplap joints at meeting rails. Door panels are constructed of 1/4″ exterior glued Luan Mahogany plywood. Windows are grid style and are attached to the door frame. All Township doors over 12 feet wide have 1/4″ Luan Mahogany plywood attached to inside of the bottom section for optimum strength and rigidity.

NOMINAL SPECIFICATIONS:

  • Frame thickness: 1-3/8″
  • Top & Bottom Rail widths: 4-7/8″, Meeting Rail Width combined: 4-1/2″
  • End Stile width: 4-7/8″, Center Stile width: 9″
  • Mullions: 2-5/8″ and 1″
  • Panels: 1/4″ Luan Mahogany plywood
  • Glass: 1/8″ clear annealed
  • Arches: Standard radius for doors up to 10′ wide door are 15′-0″ radius, those over 10′ wide are a single 58′-0″ radius or two 15′-0″ radius arches (double arches)
  • Finish: Unfinished, face sanded ready for finishing
  • 1 Year Limited Warranty
STANDARD WIDTHS: 8′-0″ 9′-0″ 16′-0″ 18′-0″
STANDARD HEIGHTS: 7′-0″ 8′-0″ 9′-0″ 10′-0″ 11′-0″ 12′-0″ 14′-0

For ease of operation do not exceed 28″ Section Height

OPTIONS:

  • Widths up to 20′, heights up to 12′, in one inch increments (180 max. sq. ft. total)
  • 1/4″ Rough Sawn Fir plywood panel
  • 3/8″ grooved Medium Density Overlay plywood with V-grooves 3″or 4″ on center
  • 3/4″ Western Red Cedar or West Coast Hem/Fir raised panels
  • Solid Rail West Coast Hem/Fir wood frame (more suitable appearance for staining)
  • Flush back of bottom section with 1/4″ plywood (standard on doors over 12 ft. wide)
  • Flush back of door 1/4″ Luan plywood & insulate with 5/8″ Polystyrene insulation
  • Decorative hardware
  • 1/8″ clear annealed glass standard, clear obscure and insulated glass optional
  • Low clearance, high lift and vertical lift track and hardware

HARDWARE: The Township Collection is equipped with 15″ radius torsion hardware; track is 2″ bracket mounted and has a 65″ horizontal reinforcing angle. Quiet long life nylon rollers, non corrosive door fixtures and graduated hinges are standard. Doors 8′ and 9 wide include one 2-1/4″ galvanized strut per door; 16′ and 18′ wide doors include one 2-1/4″ strut per section.

AVAILABLE GLASS: